NETZSCH - Mixer - PMH 18

NETZSCH MIXER, MODEL PMH 18

Year of construction 2013 (revision 2017)

Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/floor scraper. Consisting of a high-speed (speed 200-2,500 rpm) and a low-speed agitator (speed 20-200 rpm). Speed planetary disc 7-84 rpm.

Particularly suitable for the preparation of highly viscous pastes and sealing compounds. 

Completely new seals and stands in split design in material 1.4571 (AISI 316 Ti) applied in 2017 in the manufacturer's works, since then unused.

- Mixer is mounted on stainless steel plate

- High-speed mixing shaft with reversal of direction of rotation

- Mixing tools 2x cross beam and 2x butterfly, possible combinations cross beam on both sides, cross beam and butterfly, butterfly on both sides

- 2 containers each with a total capacity of approx. 18 l, usable capacity 5-15.0 l (depending on product)

- Container diam. 270 mm, depth 316 mm, total height 335 mm

- Product temperature measuring device with PT 100 sensor with switch-off of the agitator shaft drives when an adjustable set temperature is reached

- Heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water

- Hydraulic container lifting/lowering device

- Press-out device, material wetted parts 1.4404 (AISI 316 L), ground grain 320 and electropolished

- Seals VITON, PTFE compound with FDA approval

- Material stand 1.4571 (AISI 316 Ti)

- 3 spray heads

- 4-channel data recorder

- Vacuum pump, hydraulic pump

- Measuring data acquisition software

- PLC Siemens S7-300, interfaces RJ45, Ethernet, cross-over, display Stahl MT-65

- Drive 230/400V/50Hz/9kW

- No explosion protection

- Control cabinet machine Without wiring