NETZSCH - Mixer - PMH 18

DESCRIPTION:

Machine built in 2013; in 2017 completely new seals and stands in split design in material 1.4571 (AISI 316 Ti) in the manufacturer's works, unused.

• 3 spray heads

• Product temperature measuring device with PT 100 sensor with switch-off of the agitator shaft drives when an adjustable set temperature is reached

• 4-channel data recorder

• Vacuum pump, hydraulic pump

• Measuring data acquisition software

• PLC Siemens S7-300, interfaces RJ45, Ethernet, cross-over, display steel MT-65

• Drive 230/400V/50Hz/9kW

• Explosion protection

• Control cabinet machine without wiring 

• Mixer is mounted on stainless steel plate

• Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/floor scraper.

• Particularly suitable for the preparation of highly viscous pastes and sealing compounds, consisting of a high-speed (speed 200-2,500 rpm) and a low-speed agitator (speed 20-200 rpm)

• Speed planetary disc 7-84 rpm

• Mixing tools 2x cross beam and 2x butterfly, possible combinations cross beam on both sides, cross beam and butterfly, butterfly on both sides

• High-speed mixing shaft with reversal of direction of rotation

• 2 containers each with a total capacity of approx. 18 l, usable capacity 5-15.0 l (depending on product)

• Container diam. 270 mm, depth 316 mm, total height 335 mm

• Heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water

• Hydraulic container lifting/lowering device

• Press-out device, material wetted parts 1.4404 (AISI 316 L), ground grain 320 and electropolished

• Seals VITON, PTFE compound with FDA approval

• Material stand 1.4571 (AISI 316 Ti)